-
POK 25mm M&F elbow 90 degree #13 - poly
Retail Price: $11.44A poly M&F elbow (Hanson) brand that is applied to BSP 25mm threaded pump outlets.
This type of M&F elbow is multi-purpose for transferring various pipe configurations through 900 to improve the pipe connections from pump equipment outlets.
Learn More -
KS pump swing float switch
Retail Price: $124.38The KS series pumps have a water resistant power lead with socket connector, held inplace with a screwed clamp on the exterior of the pump case. This lead is Type A (with no step O ring seal) and is 10 meter length with Australian three pin plug.
Learn More -
POK pump station dual DN40 / 50mm manifold plumbing kit
Retail Price: $825.00This dual pump plumbing kit is used to connect 2 x pumps to a single 50 mm outlet pipe. Each pump has a dedicated check valve that will stop water in the outlet pipe running back into the tank when the pumps switch off and prevent one pump pushing water back into the tank via the second pump. A ball valve allow each pump to be isolated and removed independently. The kit contains: 2 x Barrel Union 2 x M&F Ball Valve 2 x Check Valve 6 x FI Connectors 1 x Back Plated Flange 2 x 90° Elbow 1 x 'T' Piece 2 x Reducers The only additional item required is a suitable length of PCV pipe, which will vary depending of the size of the collection well. An optional dual pump controller is available to manage the pumps and provide an overflow alarm if required Learn More -
SPC tank level WiWo connector float weight
Retail Price: $128.70This float assembly is used for rainwater tank low-level float control for available water source management by WiWo change-over controller. This float assembly has a WiWo ELV connector for attachment and for the control end there is a weighted float switch. The weighted float switch is suspended inside the rainwater tank and indicates that the tank has water available to be pumped to household applications or other industrial processes benefiting from using recycled water.
Learn More -
POK 50mm x 25 meter medium density PVC layflat hose with camlocks
Retail Price: $139.07This 50mm diameter hose kit assembly is normally connected to a submersible pump outlet fitted with a type F camlock connector. The hose kit assembly with male and female combination camlock connectors allows multiple extension hose kits for unlimited drainage hoses to control the wastewater over a longer distance to the safe discharge point.
The assembly hose kit uses medium density PVC layflat hose with quality camlock fitting clamped to the hose for fast and secure connection.
Learn More -
TOC pedestal couple device top rail bracket with upturn discharge bend
Retail Price: $330.00The major repair to the versatile KS series submersible pump is available using a top-end assembly. The circumstance of the many pump use applications can result in inadvertent damage like crushed or torn cables or float whilst performing in the rugged environment of construction and civil works de-watering on work sites for safety and protection of assets. The KS-10 pump range is a leading product solution in the industry and being well designed for maintenance purposes for the top end of the pump through an authorised service representative. This product assembly provides a means to repair damaged conductor(s) floats and when fitted can restore the operation of the pump for normal use. This assembly product provides some certainty with continued operations having replaced power lead and float components, secured in the inlet glands with a screwed clamp on the exterior of the pump case and then allowing for renewed conductivity and earth leakage testing. Other optional repairs are also available including seal and capacitor replacement on request where a used pump is considered suitable for repair or refurbishment. Learn More -
POK 25mm x 20M air hose with type A Minsup connector
Retail Price: $270.60This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.
Learn More -
POK 40mm full flow ball valve F&F Watermark - brass
Retail Price: $55.06This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems
Learn More -
POK 48 mm orifice outlet
Retail Price: $77.00This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems
Learn More -
POK 25mm flexible PVC pump-to-tap 25mm connection kit
SKU : PCK p2t25
Retail Price: $273.25The One Water storm pit is a utility pump and pit assembly used predominately in low lying areas around the home or parcel of land you regularly use.
Learn More