This 40 mm single-pump plumbing kit is used in smaller pump stations and collection wells.The kit includes a check valve to prevent water running back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes. The kit contains: 1 x Barrel Union 1 x M&F Ball Valve 1 x Check Valve 3 x FI Connectors 1 x Back Plated Flange 1 x 90° Elbow (40 mm) The only additional item required is a suitable length of 40 mm PCV pipe, which will vary depending of the size of the collection well. Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

This dual pump plumbing kit is used to connect higher specification pump combinations or other hydraulic requirements to a single manifold for pressurised outlet pipe discharge of sewer or wastewater. Each pump has a dedicated rising main configuration including a refuux valve that will stop water in the outlet pipe surging back into the tank when the pumps change operating configuration.  The configuration is designed for access to individual pumps in challenging operating situations (often necessary) including having an isolating backflow interupt ball valve allowing for maintenance of the internal configuration.  This also allow the system to continue to perform its operations as a short term but restricted measure.

Effulent level control is achieved using a series of floating switches or where smart technology is utilised a transducer level sensor provides for optional LED managed PC or remote cut-in settings and overflow alarm of response provisions. This kit includes atachment components for either approach if specified in the order.

Although fixed pedistal and discharge rising main configuration is the next level of configuration, the fresstanding pump configuration this plumbiong kit applies to, is adaptable and flexible representing value for pump station specifications and ease of on-site installation.

Learn More

Camlock fitting to allow hose connector - threaded Type C - male spigot (pump end usually)

Learn More

Portable and fire fighting pumps require a flexible suction line connection to the inlet of the pump wet-end. 

This hose assembly product is a 3 meter flexible hose assembly offers a robust and simple solution comprising: 3 meter spiral PVC reinforced flexible hose with one camlock type C socket connector and a PVC strainer hose tail for the inlet end of the hose with fittings banded onto the hose.

Learn More

This hose kit assembly is normally connected to a submersible pump outlet fitted with a type F camlock connector.  The hose kit assembly with male and female combination camlock connectors allows multiple extension hose kits for unlimited drainage hoses to control the wastewater over a longer distance to the safe discharge point.

The assembly hose kit uses medium density PVC layflat hose with quality camlock fitting clamped to the hose for fast and secure connection. 

Learn More

The Storz fitting is a universal fire hose connector as the smaller commionly used connector for fast and secure connection.

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More