You may also be interested in the following product(s)

POK pump station dual DN50 / 65mm manifold plumbing kit

Compare List

Be the first to review this product


Retail Price : $1,056.00

Availability: In stock

SKU: ECOV-PK50_2_65

You are not logged in

Short Description

This dual pump plumbing kit is used to connect higher specification pump combinations or other hydraulic requirements to a single manifold for pressurised outlet pipe discharge of sewer or wastewater. Each pump has a dedicated rising main configuration including a refuux valve that will stop water in the outlet pipe surging back into the tank when the pumps change operating configuration.  The configuration is designed for access to individual pumps in challenging operating situations (often necessary) including having an isolating backflow interupt ball valve allowing for maintenance of the internal configuration.  This also allow the system to continue to perform its operations as a short term but restricted measure.

Effulent level control is achieved using a series of floating switches or where smart technology is utilised a transducer level sensor provides for optional LED managed PC or remote cut-in settings and overflow alarm of response provisions. This kit includes atachment components for either approach if specified in the order.

Although fixed pedistal and discharge rising main configuration is the next level of configuration, the fresstanding pump configuration this plumbiong kit applies to, is adaptable and flexible representing value for pump station specifications and ease of on-site installation.

Detailed Description

This dual pump plumbing kit is a manifold assembly used to connect 2 x pumps to a single outlet pipe to discharge from the pump station. 

For a dual pump configuration, each pump has a dedicated check valve that will stop water in the pump outlet pipe running back into the tank in various operating conditions, for example when the pump(s) switch off and in full operational mode to prevent one pump pushing water back into the tank via the second pump. A ball valve allow each pump to be isolated and removed independently.

The packaged kit is a number of sub-assemblies (designed for packaging and freighting) that allows for final on-site placement of equipment inside the device to best suite site conditions and installation requirements. 

Tank wall outlet:

  • 1 x 65MM left and right hand threaded brass back plated flange with gasket;

  • 1 x M&F 65mm chromed brass levered isolating valve; 

(typical) rising main pressure outlet - otherwise configured for end-user pump station specification

  • 2 x uPVC Class 18 50mm solvent weld barrel unions

  • 2 x brass swing check 50mm reflux valves

or equivalent uPVC combination with rubber gasket flap valve - for wastewater

  • 1 x uPVC Class 18 65mm solvent female iron connector;

  • 1 x uPVC Class 18  65mm solvent weld 'T' piece;

  • 2 x uPVC Class 18 50mm solvent weld 90deg elbows;

  • 2 x uPVC Class 18 65mm x 50mm solvent weld reducing socket;

  • 6 x uPVC Class 18 50mm solvent weld male iron connectors;

  • 1 x uPVC PN12 65mm x 85mm stub pipe connection pieces;

  • 2 x uPVC PN9 50mm x 80mm stub pipe connection pieces;

  • 2 x uPVC PN9 50mm x 200mm stub pipe connection pieces

  • 2 x uPVC PN9 50mm x 600mm stub pipe connection pieces

  • bracket and length of conduit for transducer level control.


Cubic : 0.015
Box Size : 1000 x 150 x 100
Weight : 12.0000
Manufacturer : OneWater_supply

This product have no Price. Because we are getting price from you and we will contact if your price will be suitable...!


Video Conference

Meet with us instantly and discuss the business - with social distancing !
To Top