Pump Connections, Hoses and Spares

Position
Set Descending Direction

Grid List

10 per page

Items 41 to 50 of 76 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  1. POK DWV DN150 pipe uniseal compression connector

    Retail Price: $50.88
    This compression seal allows easy insertion of a pipe through the wall of a storage tank. Simply cut the appropriate size hole, insert the flange device and push in the pipe for a watertight seal. Learn More
  2. POK 25mm M&F elbow 90 degree #13 - poly

    Retail Price: $11.44

    A poly M&F elbow (Hanson) brand that is applied to BSP 25mm threaded pump outlets.  

    This type of M&F elbow is multi-purpose for transferring various pipe configurations through 900 to improve the pipe connections from pump equipment outlets.

    Learn More
  3. POK pump station single DN32 plumbing kit - 32mm

    Retail Price: $517.00
    This 32 mm single-pump plumbing kit is used in smaller pump stations and collection wells. The kit includes a check valve to prevent water running back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes. The kit contains: 1 x Barrel Union 1 x M&F Ball Valve 1 x Check Valve 3 x FI Connectors 1 x Back Plated Flange 1 x 90° Elbow (32 mm) The only additional item required is a suitable length of 32 mm PCV pipe, which will vary depending of the size of the collection well. Learn More
  4. POK pump station single DN40 plumbing kit - 40mm

    Retail Price: $517.00
    This 40 mm single-pump plumbing kit is used in smaller pump stations and collection wells.The kit includes a check valve to prevent water running back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes. The kit contains: 1 x Barrel Union 1 x M&F Ball Valve 1 x Check Valve 3 x FI Connectors 1 x Back Plated Flange 1 x 90° Elbow (40 mm) The only additional item required is a suitable length of 40 mm PCV pipe, which will vary depending of the size of the collection well. Learn More
  5. POK pump station single DN50 plumbing kit - 50mm

    Retail Price: $550.00
    This single-pump plumbing kit (40mm or 50mm - dependent of the pump selection) is used in smaller pump stations and collection wells. The kit includes a check valve to prevent water surging back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes. T1 x 90° Elbow (50 mm) The only additional item required is a suitable length of 50 mm Class 9, Class 12 or Class18 PCV pressure pipe, which will vary depending of the size of the collection well. Learn More
  6. POK pump station dual DN32 / 40mm manifold plumbing kit

    Retail Price: $825.00
    This dual 32 mm pump plumbing kit is used to connect 2 x 32 mm pumps to a single 50 mm outlet pipe. Each pump has a dedicated check valve to stop water in the outlet pipe running back into the tank when the pumps switch off, and an isolation valve to prevent one pump pushing water back into the tank via the second pump. The kit contains: 1 x Barrel Union 1 x M&F Ball Valve 1 x Check Valve 3 x FI Connectors 1 x Back Plated Flange 1 x 90° Elbow (50 mm) The only additional item required is a suitable length of 50 mm PCV pipe, which will vary depending of the size of the collection well. An optional dual pump controller is available to manage the pumps and provide an overflow alarm. Learn More
  7. POK pump station dual DN40 / 50mm manifold plumbing kit

    Retail Price: $825.00
    This dual pump plumbing kit is used to connect 2 x pumps to a single 50 mm outlet pipe. Each pump has a dedicated check valve that will stop water in the outlet pipe running back into the tank when the pumps switch off and prevent one pump pushing water back into the tank via the second pump. A ball valve allow each pump to be isolated and removed independently. The kit contains: 2 x Barrel Union 2 x M&F Ball Valve 2 x Check Valve 6 x FI Connectors 1 x Back Plated Flange 2 x 90° Elbow 1 x 'T' Piece 2 x Reducers The only additional item required is a suitable length of PCV pipe, which will vary depending of the size of the collection well. An optional dual pump controller is available to manage the pumps and provide an overflow alarm if required Learn More
  8. POK pump station dual DN50 / 50mm manifold plumbing kit

    Retail Price: $825.00

    This dual pump plumbing kit is used to connect pump combinations to a single manifold for pressurised outlet pipe discharge of sewer or wastewater. Each pump has a dedicated rising main configuration including a refuux valve that will stop water in the outlet pipe surging back into the tank when the pumps change operating configuration.  The configuration is designed for access to individual pumps in challenging operating situations (often necessary) including having an isolating backflow interupt ball valve allowing for maintenance of the internal configuration.  This also allow the system to continue to perform its operations as a short term but restricted measure.

    Effulent level control is achieved using a series of floating switches or where smart technology is utilised a transducer level sensor provides for optional LED managed PC or remote cut-in settings and overflow alarm of response provisions. This kit includes atachment components for either approach if specified in the order.

    Although fixed pedistal and discharge rising main configuration is the next level of configuration, the fresstanding pump configuration this plumbiong kit applies to, is adaptable and flexible representing value for pump station specifications and ease of on-site installation.

    Learn More
  9. POK pump station dual DN50 / 65mm manifold plumbing kit

    Retail Price: $1,056.00

    This dual pump plumbing kit is used to connect higher specification pump combinations or other hydraulic requirements to a single manifold for pressurised outlet pipe discharge of sewer or wastewater. Each pump has a dedicated rising main configuration including a refuux valve that will stop water in the outlet pipe surging back into the tank when the pumps change operating configuration.  The configuration is designed for access to individual pumps in challenging operating situations (often necessary) including having an isolating backflow interupt ball valve allowing for maintenance of the internal configuration.  This also allow the system to continue to perform its operations as a short term but restricted measure.

    Effulent level control is achieved using a series of floating switches or where smart technology is utilised a transducer level sensor provides for optional LED managed PC or remote cut-in settings and overflow alarm of response provisions. This kit includes atachment components for either approach if specified in the order.

    Although fixed pedistal and discharge rising main configuration is the next level of configuration, the fresstanding pump configuration this plumbiong kit applies to, is adaptable and flexible representing value for pump station specifications and ease of on-site installation.

    Learn More
  10. POK pump station dual DN65 / 80mm manifold plumbing kit

    Retail Price: $1,320.00

    This dual pump plumbing kit is used to connect higher specification pump combinations or other hydraulic requirements to a single manifold for pressurised outlet pipe discharge of sewer or wastewater. Each pump has a dedicated rising main configuration including a refuux valve that will stop water in the outlet pipe surging back into the tank when the pumps change operating configuration.  The configuration is designed for access to individual pumps in challenging operating situations (often necessary) including having an isolating backflow interupt ball valve allowing for maintenance of the internal configuration.  This also allow the system to continue to perform its operations as a short term but restricted measure.

    Effulent level control is achieved using a series of floating switches or where smart technology is utilised a transducer level sensor provides for optional LED managed PC or remote cut-in settings and overflow alarm of response provisions. This kit includes atachment components for either approach if specified in the order.

    Although fixed pedistal and discharge rising main configuration is the next level of configuration, the fresstanding pump configuration this plumbiong kit applies to, is adaptable and flexible representing value for pump station specifications and ease of on-site installation.

    Learn More
Position
Set Descending Direction

Grid List

10 per page

Items 41 to 50 of 76 total

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7

Interactive

Product Map

 

This drawing shows our products in a typical installation. The various items are active and detailed information is available by hovering over the product of interest. Click on an image and you will be re-directed to the product page



 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Rain Water Harvesting


Rainwater harvesting can provide a dramatic improvement in water utilisation and significantly reduce city water use in most situations ....READ MORE

 
Feedback
X

Video Conference

Meet with us instantly and discuss the business - with social distancing !
To Top