The One Water storm pit is a utility pump and pit assembly used predominately in low lying areas around the home or parcel of land you regularly use.

Learn More

Stainless Steel hose clamps are suitable for non-pressure flexible hose connection to tail connectors for fast and secure connection. For 25mm or smaller diameter hose a single hose connector can be used. For 40mm and larger diameter hose connection it is recommended that two hose clamps be used for each hose fitting.

Learn More

This hose kit assembly is normally connected to a submersible pump outlet fitted with a type F camlock connector.  The hose kit assembly with male and female combination camlock connectors allows multiple extension hose kits for unlimited drainage hoses to control the wastewater over a longer distance to the safe discharge point.

The assembly hose kit uses medium density PVC layflat hose with quality camlock fitting clamped to the hose for fast and secure connection. 

Learn More

This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.

Learn More

This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.

Learn More

This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

Large pump 3# 4 Pin electrical connection plug IP66 for quick connect power lead.

This plug is an optional charged for fitting and Test&Tag with pump sale

Learn More

This 32 mm single-pump plumbing kit is used in smaller pump stations and collection wells. The kit includes a check valve to prevent water running back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes. The kit contains: 1 x Barrel Union 1 x M&F Ball Valve 1 x Check Valve 3 x FI Connectors 1 x Back Plated Flange 1 x 90° Elbow (32 mm) The only additional item required is a suitable length of 32 mm PCV pipe, which will vary depending of the size of the collection well. Learn More

Includes everything needed to connect an above ground tank to an adjacent pump inlet. Learn More

This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.

Learn More

This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.

Learn More

This component part kit is a common union pump outlet fitting with a 50mm threaded socket connection for fast and secure connection typically for polyethylene hose tails or Type F camlock connector.

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

This egress step iron frame is designed to provide a sturdy means to egress from a deep well safely and suredly. 

No unqualified person should be entering into such confined space without meeting the safety provisions and with qualified support inplace before any essential entry.  This step iron frame provides a means to climb out of a tank with a greater depth beyond 1200mm.

# WARNING  This step iron frame is not provided for tank access.  

Learn More

This 40 mm single-pump plumbing kit is used in smaller pump stations and collection wells.The kit includes a check valve to prevent water running back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes. The kit contains: 1 x Barrel Union 1 x M&F Ball Valve 1 x Check Valve 3 x FI Connectors 1 x Back Plated Flange 1 x 90° Elbow (40 mm) The only additional item required is a suitable length of 40 mm PCV pipe, which will vary depending of the size of the collection well. Learn More

Portable and fire fighting pumps require a flexible suction line connection to the inlet of the pump wet-end. 

This hose assembly product is a 3 meter flexible hose assembly offers a robust and simple solution comprising: 3 meter spiral PVC reinforced flexible hose with one camlock type C socket connector and a PVC strainer hose tail for the inlet end of the hose with fittings banded onto the hose.

Learn More