The selection of a pedestal discharge pipe configuration and pump access rail system are used in industrial applications that provide a system of operating risk reduction and ease of maintenance for the operations of the pump installation.

Learn More

Ecov DN150 threaded tank adapter for DWV SW pipe and fittings.  The adapter incorporates a tool connect fitting design and includes one standard screw-cap flat washer and a 10 mm round x 158 mm diameter rubber O'ring for secondary sealing.

The use of this assembly avoids cuting into the side wall of a polyethylene or other tank causing a change in the structurial integrity of the tank and its ground loading effect on its design safety factor.

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

A poly M&F elbow (Hanson) brand that is applied to BSP 25mm threaded pump outlets.  

This type of M&F elbow is multi-purpose for transferring various pipe configurations through 900 to improve the pipe connections from pump equipment outlets.

Learn More

This float assembly  is used for rainwater tank low-level float control for available water source management by WiWo change-over controller.  This float assembly has a WiWo ELV connector for attachment and for the control end there is a weighted float switch.  The weighted float switch is suspended inside the rainwater tank and indicates that the tank has water available to be pumped to household applications or other industrial processes benefiting from using recycled water. 

Learn More

This dual pump plumbing kit is used to connect 2 x pumps to a single 50 mm outlet pipe. Each pump has a dedicated check valve that will stop water in the outlet pipe running back into the tank when the pumps switch off and prevent one pump pushing water back into the tank via the second pump. A ball valve allow each pump to be isolated and removed independently. The kit contains: 2 x Barrel Union 2 x M&F Ball Valve 2 x Check Valve 6 x FI Connectors 1 x Back Plated Flange 2 x 90° Elbow 1 x 'T' Piece 2 x Reducers The only additional item required is a suitable length of PCV pipe, which will vary depending of the size of the collection well. An optional dual pump controller is available to manage the pumps and provide an overflow alarm if required Learn More

This 50mm diameter hose kit assembly is normally connected to a submersible pump outlet fitted with a type F camlock connector.  The hose kit assembly with male and female combination camlock connectors allows multiple extension hose kits for unlimited drainage hoses to control the wastewater over a longer distance to the safe discharge point.

The assembly hose kit uses medium density PVC layflat hose with quality camlock fitting clamped to the hose for fast and secure connection. 

Learn More

This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More