This 50mm diameter hose kit assembly is normally connected to a submersible pump outlet fitted with a type F camlock connector.  The hose kit assembly with male and female combination camlock connectors allows multiple extension hose kits for unlimited drainage hoses to control the wastewater over a longer distance to the safe discharge point.

The assembly hose kit uses medium density PVC layflat hose with quality camlock fitting clamped to the hose for fast and secure connection. 

This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.

Stainless Steel hose clamps are suitable for non-pressure flexible hose connection to tail connectors for fast and secure connection. For 25mm or smaller diameter hose a single hose connector can be used. For 40mm and larger diameter hose connection it is recommended that two hose clamps be used for each hose fitting.

The Storz fitting is a universal fire hose connector as the smaller commionly used connector for fast and secure connection.

This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

The One Water storm pit is a utility pump and pit assembly used predominately in low lying areas around the home or parcel of land you regularly use.

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

A poly M&F elbow (Hanson) brand that is applied to BSP 25mm threaded pump outlets.  

This type of M&F elbow is multi-purpose for transferring various pipe configurations through 900 to improve the pipe connections from pump equipment outlets.