POK pump station single DN50 plumbing kit - 50mm

This 50 mm single-pump plumbing kit is used in smaller pump stations and collection wells. The kit includes a check valve to prevent water surging back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes.

The kit contains:
1 x 50MM left and right hand threaded Poly Back Plated Flange with gasket
1 x M&F 50mm chromed brass levered Ball valve;

40mm or 50mm - depending on the pump selection !!!
(1 x Barrel Unions
1 x Check Valves (brass swing check)
3 x MI Connectors)
or equivalent uPVC combination with rubber gasket flap valve - for wastewater;

1 x 90° Class 18 Elbows

50mm
1 x Class 18 'T' Piece
1 x Class 18 Reducers

The only additional item required is a suitable length of PCV pipe (usually about 1 meter to 1.5 meters required on shallow tank), which will vary depending of the depth of the collection well. An optional dual pump controller is available to manage the pumps and provide an overflow alarm if required.

The only additional item required is a suitable length of 50 mm PCV pipe, which will vary depending of the size of the collection well.