This egress step iron frame is designed to provide a sturdy means to egress from a deep well safely and suredly. 

No unqualified person should be entering into such confined space without meeting the safety provisions and with qualified support inplace before any essential entry.  This step iron frame provides a means to climb out of a tank with a greater depth beyond 1200mm.

# WARNING  This step iron frame is not provided for tank access.  

Learn More

This compression seal allows easy insertion of a pipe through the wall of a storage tank. Simply cut the appropriate size hole, insert the flange device and push in the pipe for a watertight seal. Learn More

This compression seal allows easy insertion of a pipe through the wall of a storage tank. Simply cut the appropriate size hole, insert the flange device and push in the pipe for a watertight seal. Learn More

A poly M&F elbow (Hanson) brand that is applied to BSP 25mm threaded pump outlets.  

This type of M&F elbow is multi-purpose for transferring various pipe configurations through 900 to improve the pipe connections from pump equipment outlets.

Learn More

This 32 mm single-pump plumbing kit is used in smaller pump stations and collection wells. The kit includes a check valve to prevent water running back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes. The kit contains: 1 x Barrel Union 1 x M&F Ball Valve 1 x Check Valve 3 x FI Connectors 1 x Back Plated Flange 1 x 90° Elbow (32 mm) The only additional item required is a suitable length of 32 mm PCV pipe, which will vary depending of the size of the collection well. Learn More

This 40 mm single-pump plumbing kit is used in smaller pump stations and collection wells.The kit includes a check valve to prevent water running back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes. The kit contains: 1 x Barrel Union 1 x M&F Ball Valve 1 x Check Valve 3 x FI Connectors 1 x Back Plated Flange 1 x 90° Elbow (40 mm) The only additional item required is a suitable length of 40 mm PCV pipe, which will vary depending of the size of the collection well. Learn More

This single-pump plumbing kit (40mm or 50mm - dependent of the pump selection) is used in smaller pump stations and collection wells. The kit includes a check valve to prevent water surging back into the tank when the pump switches off and a stop valve to isolate the system for maintenance or cleaning purposes. T1 x 90° Elbow (50 mm) The only additional item required is a suitable length of 50 mm Class 9, Class 12 or Class18 PCV pressure pipe, which will vary depending of the size of the collection well. Learn More

This dual 32 mm pump plumbing kit is used to connect 2 x 32 mm pumps to a single 50 mm outlet pipe. Each pump has a dedicated check valve to stop water in the outlet pipe running back into the tank when the pumps switch off, and an isolation valve to prevent one pump pushing water back into the tank via the second pump. The kit contains: 1 x Barrel Union 1 x M&F Ball Valve 1 x Check Valve 3 x FI Connectors 1 x Back Plated Flange 1 x 90° Elbow (50 mm) The only additional item required is a suitable length of 50 mm PCV pipe, which will vary depending of the size of the collection well. An optional dual pump controller is available to manage the pumps and provide an overflow alarm. Learn More

This dual pump plumbing kit is used to connect 2 x pumps to a single 50 mm outlet pipe. Each pump has a dedicated check valve that will stop water in the outlet pipe running back into the tank when the pumps switch off and prevent one pump pushing water back into the tank via the second pump. A ball valve allow each pump to be isolated and removed independently. The kit contains: 2 x Barrel Union 2 x M&F Ball Valve 2 x Check Valve 6 x FI Connectors 1 x Back Plated Flange 2 x 90° Elbow 1 x 'T' Piece 2 x Reducers The only additional item required is a suitable length of PCV pipe, which will vary depending of the size of the collection well. An optional dual pump controller is available to manage the pumps and provide an overflow alarm if required Learn More

This dual pump plumbing kit is used to connect pump combinations to a single manifold for pressurised outlet pipe discharge of sewer or wastewater. Each pump has a dedicated rising main configuration including a refuux valve that will stop water in the outlet pipe surging back into the tank when the pumps change operating configuration.  The configuration is designed for access to individual pumps in challenging operating situations (often necessary) including having an isolating backflow interupt ball valve allowing for maintenance of the internal configuration.  This also allow the system to continue to perform its operations as a short term but restricted measure.

Effulent level control is achieved using a series of floating switches or where smart technology is utilised a transducer level sensor provides for optional LED managed PC or remote cut-in settings and overflow alarm of response provisions. This kit includes atachment components for either approach if specified in the order.

Although fixed pedistal and discharge rising main configuration is the next level of configuration, the fresstanding pump configuration this plumbiong kit applies to, is adaptable and flexible representing value for pump station specifications and ease of on-site installation.

Learn More

This dual pump plumbing kit is used to connect higher specification pump combinations or other hydraulic requirements to a single manifold for pressurised outlet pipe discharge of sewer or wastewater. Each pump has a dedicated rising main configuration including a refuux valve that will stop water in the outlet pipe surging back into the tank when the pumps change operating configuration.  The configuration is designed for access to individual pumps in challenging operating situations (often necessary) including having an isolating backflow interupt ball valve allowing for maintenance of the internal configuration.  This also allow the system to continue to perform its operations as a short term but restricted measure.

Effulent level control is achieved using a series of floating switches or where smart technology is utilised a transducer level sensor provides for optional LED managed PC or remote cut-in settings and overflow alarm of response provisions. This kit includes atachment components for either approach if specified in the order.

Although fixed pedistal and discharge rising main configuration is the next level of configuration, the fresstanding pump configuration this plumbiong kit applies to, is adaptable and flexible representing value for pump station specifications and ease of on-site installation.

Learn More

This dual pump plumbing kit is used to connect higher specification pump combinations or other hydraulic requirements to a single manifold for pressurised outlet pipe discharge of sewer or wastewater. Each pump has a dedicated rising main configuration including a refuux valve that will stop water in the outlet pipe surging back into the tank when the pumps change operating configuration.  The configuration is designed for access to individual pumps in challenging operating situations (often necessary) including having an isolating backflow interupt ball valve allowing for maintenance of the internal configuration.  This also allow the system to continue to perform its operations as a short term but restricted measure.

Effulent level control is achieved using a series of floating switches or where smart technology is utilised a transducer level sensor provides for optional LED managed PC or remote cut-in settings and overflow alarm of response provisions. This kit includes atachment components for either approach if specified in the order.

Although fixed pedistal and discharge rising main configuration is the next level of configuration, the fresstanding pump configuration this plumbiong kit applies to, is adaptable and flexible representing value for pump station specifications and ease of on-site installation.

Learn More

The selection of a pedestal discharge pipe configuration and pump access rail system are used in industrial applications that provide a system of operating risk reduction and ease of maintenance for the operations of the pump installation.

Learn More

The major repair to the versatile KS series submersible pump is available using a top-end assembly. The circumstance of the many pump use applications can result in inadvertent damage like crushed or torn cables or float whilst performing in the rugged environment of construction and civil works de-watering on work sites for safety and protection of assets. The KS-10 pump range is a leading product solution in the industry and being well designed for maintenance purposes for the top end of the pump through an authorised service representative. This product assembly provides a means to repair damaged conductor(s) floats and when fitted can restore the operation of the pump for normal use. This assembly product provides some certainty with continued operations having replaced power lead and float components, secured in the inlet glands with a screwed clamp on the exterior of the pump case and then allowing for renewed conductivity and earth leakage testing. Other optional repairs are also available including seal and capacitor replacement on request where a used pump is considered suitable for repair or refurbishment. Learn More

Includes everything needed to connect an above ground tank to an adjacent pump inlet. Learn More

Portable and fire fighting pumps require a flexible suction line connection to the inlet of the pump wet-end. 

This hose assembly product is a 3 meter flexible hose assembly offers a robust and simple solution comprising: 3 meter spiral PVC reinforced flexible hose with one camlock type C socket connector and a PVC strainer hose tail for the inlet end of the hose with fittings banded onto the hose.

Learn More

18 litre receiver tank for water pressure systems that connects with a 25mm BSP thread.

Learn More

This kit allows large water volumes to be stored by interconecting multiple tanks together. Storage capacity is only limited by the area available for tank installation. The system uses camlok fitting for fast and secure connection.

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More