This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

The BPS series pumps have a low level inlet that allows drainage down to 3mm from floor level. This bottom grate is a thermoplastic material that has a long life span that fits into a formed recedd and securred with three stainless screws into the bottom pump chamber housing attached to the pump motor housing. A 5mm side entry grate is available as an option upon request.

Learn More

The BPS series pumps have a low level inlet that allows drainage down to 3mm from floor level. This bottom grate is a thermoplastic material that has a long life span that fits into a formed recedd and securred with three stainless screws into the bottom pump chamber housing attached to the pump motor housing. A 5mm side entry grate is available as an option upon request.

Learn More

Minsup type A claw fitting with 25mm threaded socket connector.

This is European type connector with open claw channel that will typically match with 19mm and 25mm hose connectors.

Learn More

The pump body housing part is a thermoplastic moulded component part of a BPS series pump(s).  As a component part it is easily replacable if damage has been caused in use and otherwise has a considerable lifespan in protected use. 

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

The BPS series pumps have a water resistant power lead with socket connector, held inplace with a screwed clamp on the exterior of the pump case. This lead is Type A (with no step O ring seal) and is 10 meter length with Australian three pin plug.

Learn More

The BPS series pumps have a water resistant power lead with socket connector, held inplace with a screwed clamp on the exterior of the pump case. This lead is Type B (with new design seal) and is 10 meter length with Australian three pin plug.

Learn More

The BPS series pumps have a water resistant power lead with socket connector, held inplace with a screwed clamp on the exterior of the pump case. This lead is Type A (with no step O ring seal) and is 10 meter length with Australian three pin plug.

Learn More

The KS series pumps have a water resistant power lead with socket connector, held inplace with a screwed clamp on the exterior of the pump case. This lead is Type A (with no step O ring seal) and is 10 meter length with Australian three pin plug.

Learn More

The BPS series pumps have a water resistant power lead with socket connector, held inplace with a screwed clamp on the exterior of the pump case. This lead is Type A (with no step O ring seal) and is 10 meter length with Australian three pin plug.

Learn More

This orifice outlet allows captured stormwater to be released into the public drainage system once a storm event has passed. The orifice can also be configured to provide stormwater infiltaion and to prevent tank flotation in saturated ground. 48 mm is common for on-site retention systems

Learn More

The major repair to the versatile KS series submersible pump is available using a top-end assembly. The circumstance of the many pump use applications can result in inadvertent damage like crushed or torn cables or float whilst performing in the rugged environment of construction and civil works de-watering on work sites for safety and protection of assets. The KS-10 pump range is a leading product solution in the industry and being well designed for maintenance purposes for the top end of the pump through an authorised service representative. This product assembly provides a means to repair damaged conductor(s) floats and when fitted can restore the operation of the pump for normal use. This assembly product provides some certainty with continued operations having replaced power lead and float components, secured in the inlet glands with a screwed clamp on the exterior of the pump case and then allowing for renewed conductivity and earth leakage testing. Other optional repairs are also available including seal and capacitor replacement on request where a used pump is considered suitable for repair or refurbishment. Learn More

The major repair to the versatile KS series submersible pump is available using a top-end assembly. The circumstance of the many pump use applications can result in inadvertent damage like crushed or torn cables or float whilst performing in the rugged environment of construction and civil works de-watering on work sites for safety and protection of assets. The KS-10 pump range is a leading product solution in the industry and being well designed for maintenance purposes for the top end of the pump through an authorised service representative. This product assembly provides a means to repair damaged conductor(s) floats and when fitted can restore the operation of the pump for normal use. This assembly product provides some certainty with continued operations having replaced power lead and float components, secured in the inlet glands with a screwed clamp on the exterior of the pump case and then allowing for renewed conductivity and earth leakage testing. Other optional repairs are also available including seal and capacitor replacement on request where a used pump is considered suitable for repair or refurbishment. Learn More

This float assembly  is used for rainwater tank low-level float control for available water source management by WiWo change-over controller.  This float assembly has a WiWo ELV connector for attachment and for the control end there is a weighted float switch.  The weighted float switch is suspended inside the rainwater tank and indicates that the tank has water available to be pumped to household applications or other industrial processes benefiting from using recycled water. 

Learn More

Camlock fitting to allow hose connector - threaded Type C - male spigot (pump end usually)

Learn More

Camlock fitting to allow hose connector - threaded Type C - male spigot (pump end usually)

Learn More